Septic, sewer, excavation and concrete across Metro DetroitSeptic, sewer, excavation and concrete
Call or text (877) 633-5773 Fully licensed and insured
Delpres Services
Large new concrete slab with dark decorative bands in front of a new house still in house wrap, beside a stacked stone wall
Call (877) 633-5773 Request a Quote

How Much Does a Concrete Slab Cost in Michigan?

A plain concrete slab costs about $6.50 to $10.50 per square foot to pour, in a national concrete cost guide updated in July 2026. A second national guide, last updated in December 2024, puts slabs at $4.34 to $7.73 per square foot.

For a 24 by 24 foot garage floor, the 2026 range works out to about $3,740 to $6,050. Thickness, reinforcement, the base under the slab and site access move the number from there.

These are market numbers, not our price list. Delpres Services pours concrete foundations, footings and slabs across Metro Detroit, including slabs for garages and additions. Every job starts with a free estimate and a written quote.

What does a concrete slab cost per square foot?

Two national cost guides set the market range. The newer one puts a plain slab at $6.50 to $10.50 per square foot for materials and labor. The older one gives a lower band and splits it by thickness and reinforcement.

SlabMarket price per sq ftSource
Plain slab, poured$6.50 to $10.50National guide, July 2026
Typical slab$4.34 to $7.73Second guide, December 2024
4 inch slab, average$5.35Second guide, December 2024
6 inch slab, average$6.19Second guide, December 2024
Reinforced slab: mesh or rebar, vapor barrier, thickened edges$9.29 to $10.04Second guide, December 2024

The concrete itself is only part of the bill. Ready-mix runs $160 to $195 per cubic yard nationwide, the 2026 guide says. At 4 inches thick, one cubic yard covers about 81 square feet. A 24 by 24 floor takes about 7 cubic yards, or roughly $1,140 to $1,390 of concrete. The rest of the total is delivery and the labor for pouring and finishing.

What does a slab cost for a garage, patio, shed or addition?

The use sets the size, the thickness and the work under the slab. This table applies the guides’ per-square-foot prices to common sizes. The totals are our arithmetic on market figures.

What the slab is forThickness in the guidesMarket price per sq ftExample sizeExample total
Shed or utility pad4 to 6 inches$6.50 to $10.50 (plain slab)10 by 12 ft, 120 sq ftabout $780 to $1,260
Patio4 to 6 inches (slabs in general)$4.40 to $1612 by 16 ft, 192 sq ftabout $845 to $3,070
Garage floor4 to 6 inches$6.50 to $10.50 plain, $9.29 to $10.04 reinforced24 by 24 ft, 576 sq ftabout $3,740 to $6,050 plain
Addition or house slabThicker around the edges$4.50 to $14 (monolithic slab foundation)16 by 20 ft, 320 sq ftabout $1,440 to $4,480

A monolithic slab is poured all at once, with the thickened edge and the floor in one piece. One guide says that keeps labor costs down. A slab under an addition still has to meet the footing rules in your town, covered below.

Patios swing the most, because the finish drives the price. Decorative patios belong with stamped concrete. Driveways are their own job: see concrete driveways and our concrete driveway cost guide.

What moves the price of a concrete slab?

Thickness. A thicker slab uses more concrete. In the 2024 guide, the average climbs from $5.35 per square foot at 4 inches to $6.19 at 6 inches. On a 24 by 24 floor, that gap is about $480.

Reinforcement. Wire mesh or rebar adds cost, and one guide says wire mesh helps keep cracks from developing. Add a vapor barrier and thickened edges, and that guide’s range rises to $9.29 to $10.04 per square foot.

The base and the site. Gravel is a common base under a slab. One guide notes that its slab prices leave out land preparation. Stripping topsoil, grading and hauling dirt off are excavation and site work, and they add to the quote.

Access and small loads. A truck that can back up to the forms keeps the pour simple. A tight backyard can mean pumping or wheeling the concrete in. Small pours can carry extra charges too: the 2026 guide says some supplier quotes included delivery or short-load fees.

The finish. A broom finish is the plain choice. Stamped, colored and polished finishes cost more, and the 2026 guide says special finishes add a lot to the price. A garage or shop floor can later take polished concrete or an epoxy floor.

What does it cost to remove an old slab first?

Replacing a cracked or sunken slab starts with breaking out the old one. That is concrete removal, and it shows up as its own line on a quote. The broken pieces get loaded and hauled off the site.

The guides we checked for this post did not give a per-square-foot price for removal, so we leave a number out. The slab’s size and thickness, any steel inside it and the haul distance all affect that cost. Your written quote shows it before any work starts.

How do Michigan winters and building codes change a slab?

Michigan’s freeze-thaw winters and road salt are hard on concrete. Frozen ground can lift a slab that sits on a poor base, so drainage and compaction under it matter. A garage floor also takes the salty slush that drips off the car.

A slab that carries a building sits on footings or a thickened edge set by the local building code. In Livonia, for example, the city’s detached garage guide calls for a 42 inch deep poured footing once a garage reaches 600 square feet. Accessory buildings from 200 to 600 square feet there sit on a shallower poured concrete ratwall. Your own city or township may set a different depth, and its building department gives the number for your lot.

Permits follow the same local pattern. Livonia requires a building permit for an accessory building over 200 square feet. There, the open trench is inspected before concrete is placed. For an addition or an attached garage, ask the local building department what the permit covers. Whether a patio slab needs a permit is a local call, and the building department for your address answers it.

Before any digging, Michigan’s dig law has the excavator give MISS DIG notice at least 72 hours, and no more than 14 calendar days, ahead. MISS DIG does not mark private lines, such as a power feed run to a detached garage. Those have to be found another way before the dig.

How do you get a real price for your slab?

Market ranges are a starting point. Your price depends on the slab’s size and use, the ground under it and how the trucks reach it. Delpres Services builds garage and addition slabs along with the footings and foundations under them. We look at the site, then put the price in writing. Call (877) 633-5773 to set up a free estimate.

Frequently asked questions

How much does a 24 by 24 concrete slab cost?
At the 2026 guide's $6.50 to $10.50 per square foot, a plain 576 square foot slab comes to about $3,740 to $6,050. With mesh or rebar, a vapor barrier and thickened edges, the 2024 guide's $9.29 to $10.04 per square foot gives about $5,350 to $5,780. Removing an old slab and site work come on top.
How thick should a concrete slab be?
One national guide says concrete slabs are typically 4 to 6 inches thick. It puts shed slabs and garage floors in that same band. The footing or thickened edge under a building follows your local building code.
Is a 6 inch slab worth the extra cost?
In one guide, the average goes from $5.35 per square foot at 4 inches to $6.19 at 6 inches. On a 24 by 24 floor, that is about $480 more. The thicker slab makes sense where heavy vehicles or equipment will sit.
Does a concrete slab need a permit in Michigan?
It depends on the city or township and on what the slab carries. In Livonia, a building permit is required for an accessory building over 200 square feet. A plain patio slab is a local call. The building department for your address answers the question for your lot.
Do wire mesh and rebar raise the price?
Yes. One national guide puts a slab with mesh or rebar, a vapor barrier and thickened edges at $9.29 to $10.04 per square foot. A plain 4 inch slab averages $5.35 in the same guide. The guide says wire mesh helps keep cracks from developing.
How much does the concrete itself cost?
Ready-mix runs $160 to $195 per cubic yard nationwide, in a guide updated in July 2026. At 4 inches thick, one cubic yard covers about 81 square feet. Delivery and the labor for pouring and finishing make up much of the rest of a slab's price.
Is this what Delpres Services charges?
No. Every price in this post is a market figure from national cost guides, not our price list. After a free estimate, we put the price for your slab in a written quote. Call (877) 633-5773 to set one up.
Request a Quote

Get In Touch With Delpres

Tell us what the job is and where it is, and we will set up a free on-site estimate. Call (877) 633-5773, or send the form.

  • Call or text (877) 633-5773
  • Serving Harrison Township, MI and all of Metro Detroit
  • Written quotes · septic, sewer, excavation and concrete

Request a Quote

Tell us about the septic, sewer, excavation or concrete work and where it is. We look at the job and put a free estimate in writing.

Call (877) 633-5773